MOULD ASSESSMENT | MOULD REMEDIATION | CONSULTING

The services listed below is not all encompassing of the services we can provide.  Please call us to discuss how GeoFocus can tailor a solution for your project.

Mould Inspection

If you have mould or believe you have mould, an inspection is a beginning point. For a nominal fee we can come on site and perform an inspection, taking into consideration the history of the property, current dampness, the moisture source, affected materials, and suspected affected areas. We have a variety of moisture detection meters and devices, and are experienced in construction deficiency identification and rectification of mould causing issues. Call us for a mold inspection if you have concerns about your property.  To contact a technician regarding mould [mold] assessment and/or remediation click here.

Mould Testing

Mould exposure is typically from spores that get airborne and we breath them in. Mould spores are so small they are not visible in the air. Mould testing can measure and document the quantity and varieties of mould in the air. This type of information can be helpful in determining the scope of work necessary; documenting the results of the mould removal and may also provide clerical documentation confirming the successfulness of remediation.  Mould testing should only be conducted or coordinated by experienced firms.  Mould testing is not a requirement on every project and should be utilized only when results are anticipated to assist the client.  To contact a technician regarding mould [mold] assessment and/or remediation click here.

Mould and Mildew

Mould is most prolific between 75°F/24°C and 85°F/29°C. Building interiors can provide a "prime" environment for growth and reproduction of mold, mildew and bacteria. All are parasitic and rely on organic matter for food. Mould breaks down organic matter and its food sources such as wood, paper, drywall, paneling, and ceiling tiles. Decaying organic jute backing on carpets coupled with warm humid air, creates an ideal environment for reproduction.

Bacteria

Bacteria differs in it's climatic preferences. Some are able to survive below freezing while others are active to temperatures above 150°F/66°C. It is similar to mildew in that its preferred temperature for growth is 75°F/24°C.

Mould Remediation

Once the source of the mould is resolved the clean-up begins. Clean-up measures include:

CONTAINMENT: Isolating the area to prevent the mold from spreading beyond it's existing area. Negative air pressure machines are generally used in conjunction with temporary containment systems.

NEUTRALIZE: Anti-microbial solutions may be applied to contaminated areas in order to neutralize and/or encapsulate mould prior to removal.

IMPORTANT FACT: Chlorine Bleach does not effectively kill mould on porous surfaces (wood, drywall, etc). It is not an approved mehtod for mould remediation.

REMOVAL: Removal of contaminated materials using various methods and proper disposal.

COATINGS: Depending on the situation, we may recommend the application of Anti-Microbial coating to prevent the recolinization of Mould on the remediated area.

DURING THE REMEDIATION PROCESS, THE USE OF PERSONAL PROTECTIVE GEAR IS MANDATORY IN THE CONTAINMENT AREA. YOU SHOULD NEVER ENTER THE CONTAINMENT AREA WITHOUT CONSULTING WITH THE CERTIFIED REMEDIATOR FIRST.

GeoFocus Mould Solutions main priority when interacting with a new client is to educate the potential client so they have the ability to make a qualified decision when retaining a contractor.  Whether the presence of mould may affect a person’s health depends on the susceptibility of an individual, the dose of mould exposed to, the route of entry, and the environmental variables particular to a case.  Responding to mould problems requires a series of actions. The order in which actions take place is sometimes important. Typically, the following actions are implemented to some extent regardless of whether a problem is small and simple or large and complex:  To learn more about mould [mold] assessment, click here.  To learn more about mould [mold] remediation, click here.